A Photo-Modeling Approach to Restituting 3D Model Data from Single 2D Imagery for Rapid Prototyping of Artifact Products

Zheng-Xu Zhao; Kai-Ling Li

doi:10.1007/s11633-006-0069-x

January 2006

Article Contents

Zheng-Xu Zhao and Kai-Ling Li. A Photo-Modeling Approach to Restituting 3D Model Data from Single 2D Imagery for Rapid Prototyping of Artifact Products. International Journal of Automation and Computing, vol. 3, no. 1, pp. 69-75, 2006 doi: 10.1007/s11633-006-0069-x

Cite as: Zheng-Xu Zhao and Kai-Ling Li. A Photo-Modeling Approach to Restituting 3D Model Data from Single 2D Imagery for Rapid Prototyping of Artifact Products. International Journal of Automation and Computing, vol. 3, no. 1, pp. 69-75, 2006 doi: 10.1007/s11633-006-0069-x

A Photo-Modeling Approach to Restituting 3D Model Data from Single 2D Imagery for Rapid Prototyping of Artifact Products

Zheng-Xu Zhao^1,2,
Kai-Ling Li³

1.
Department of Instrumentation Science and Engineering, Southeast University, Nanjing 210096, PRC;
2.
School of Computing, The University of Derby, Kedleston Road, Derby DE22 1GB, UK;
3.
School of Mechanical & Manufacturing Engineering, Shandong University, Jinan 250061, PRC

Received: 2005-02-13

Fund Project:

This work is supported by Cheung Kong Scholars Program of the People's Republic of China, in association with Southeast University, Nanjing, PRC. (No.seuzx042001)

Abstract

This article first generalizes the basic engineering phases of modern rapid prototyping processes, and then describes the techniques of data capture for data modeling and model making. The article also provides a brief overview of the photogrametric techniques of restitution of 3D objects, and highlights the difficulties and limitations of existing methods. It therefore presents a novel approach to photo-modeling for acquiring 3D model data from single 2D photorealistic images. Implementation of the approach is then described against a background of rapid prototyping processes to demonstrate the effectiveness of photo-modeling practice.
- Rapid prototyping,
- photo-modeling,
- photogrammetry,
- virtual reality

References

[1]	C.A.Johnson.Recent developments in rapid prototyping &manufacturing technologies.In Proceedings of Conference of Time Compression Technology 2002 (TCT2002),Future Focus's Session,Repaid News Publications plc.Time Compression Technologies,Cheshire,UK,2002.
[2]	DELCAM.Reverse Engineering,[Online] .Availabe:http://www.delcam.com,2003.
[3]	M.Carbonnell,R.W.A.Dallas.The International Committee for Architectural Photogrammetry (CIPA)-aims,achievements,activities.Photogrammetria,vol.40,no.9,pp.193,1985.
[4]	M.Carbonnell,R.W.A.Dallas.The International Committee for Architectural Photogrammetry:A review of past achievements and future intentions.Photogrammetric Record,vol.62,no.11,pp.193,1985.
[5]	J.Badekas.3D Detailed Reconstruction of a Demolished Building by Using Old Photographs.The International Archives of Photogrammetry and Remote Sensing,vol.31,Part BS,pp.16,1996.
[6]	Introduction to Photogrammetry,[Online] .Availabe:http://www.univie.ac.at/Luft bildarchiv/wgv/intro.ht ml,2004.
[7]	Measuring and modeling the real world,[Online] .Availabe:http://www.photomodeler.com,2004.
[8]	R.S.Wright Jr,M.Sweet.OpenGL SuperBible,2nd edition,Waite Group Press,Indianapolis,USA,pp.198-206,2000.

Metrics

[1]	Peng-Xia Cao, Wen-Xin Li, Wei-Ping Ma. A Tracking Registration Method for Augmented Reality Based on Multi-modal Template Matching and Point Clouds . International Journal of Automation and Computing, 2021, 18(2): 288-299. doi: 10.1007/s11633-020-1265-9
[2]	Peng-Xia Cao, Wen-Xin Li, Wei-Ping Ma. Tracking Registration Algorithm for Augmented Reality Based on Template Tracking . International Journal of Automation and Computing, 2020, 17(2): 257-266. doi: 10.1007/s11633-019-1198-3
[3]	Wei Wang, Xiao-Dan Huang. Virtual Plate Based Controlling Strategy of Toy Play for Robot's Communication Development in JA Space . International Journal of Automation and Computing, 2019, 16(1): 93-101. doi: 10.1007/s11633-016-1022-2
[4]	Mohammad S. Hasan, Hongnian Yu. Innovative Developments in HCI and Future Trends . International Journal of Automation and Computing, 2017, 14(1): 10-20. doi: 10.1007/s11633-016-1039-6
[5]	Hai-Peng Zhang, Bao-Qun Yin, Xiao-Nong Lu. Modeling and Analysis for Streaming Service Systems . International Journal of Automation and Computing, 2014, 11(4): 449-458. doi: 10.1007/s11633-014-0812-7
[6]	Petr Šaloun, David Andrešič, Petr Škoda, Ivan Zelinka. Visualization of Large Amount of Spectra in Virtual Observatory Environment . International Journal of Automation and Computing, 2014, 11(6): 613-620. doi: 10.1007/s11633-014-0845-y
[7]	Xiao-Jun Chen, Jing Zhang, Jun-Huai Li, Xiang Li. Resource Reconstruction Algorithms for On-demand Allocation in Virtual Computing Resource Pool . International Journal of Automation and Computing, 2012, 9(2): 142-154. doi: 10.1007/s11633-012-0627-3
[8]	Yang Su, Zhi-Jie Xu, Xiang-Qian Jiang. Real-time Virtual Environment Signal Extraction and Denoising Using Programmable Graphics Hardware . International Journal of Automation and Computing, 2009, 6(4): 326-334. doi: 10.1007/s11633-009-0326-x
[9]	Qing-Jin Peng, Xiu-Mei Kang, Ting-Ting Zhao. Effective Virtual Reality Based Building Navigation Using Dynamic Loading and Path Optimization . International Journal of Automation and Computing, 2009, 6(4): 335-343. doi: 10.1007/s11633-009-0335-9
[10]	Xiao-Jing Zhou, Zheng-Xu Zhao. The Skin Deformation of a 3D Virtual Human . International Journal of Automation and Computing, 2009, 6(4): 344-350. doi: 10.1007/s11633-009-0344-8
[11]	Ning-Ning Zhou, Yu-Long Deng. Virtual Reality:A State-of-the-Art Survey . International Journal of Automation and Computing, 2009, 6(4): 319-325. doi: 10.1007/s11633-009-0319-9
[12]	Po Yang, Wenyan Wu, Mansour Moniri, Claude C. Chibelushi. A Sensor-based SLAM Algorithm for Camera Tracking in Virtual Studio . International Journal of Automation and Computing, 2008, 5(2): 152-162. doi: 10.1007/s11633-008-0152-6
[13]	Ying Zhang, Adrian R L Travis. Creation and Evaluation of a Multi-sensory Virtual Assembly Environment . International Journal of Automation and Computing, 2008, 5(2): 163-173. doi: 10.1007/s11633-008-0163-3
[14]	Yun Liu, De Xu, Min Tan. A New Pre-alignment Approach Based on Four-Quadrant-Photo-Detector for IC Mask . International Journal of Automation and Computing, 2007, 4(2): 208-216. doi: 10.1007/s11633-007-0208-z
[15]	Jie Tang, Gang-Shan Wu, Fu-Yan Zhang, Ming-Min Zhang. Fast Approximate Geodesic Paths on Triangle Mesh . International Journal of Automation and Computing, 2007, 4(1): 8-13. doi: 10.1007/s11633-007-0008-5
[16]	Ming-Min Zhang, Zhi-Geng Pan, Li-Feng Ren, Peng Wang. Image-based Virtual Exhibit and Its Extension to 3D . International Journal of Automation and Computing, 2007, 4(1): 18-24. doi: 10.1007/s11633-007-0018-3
[17]	Myeong Won Lee, Jae Moon Lee. Generation and Control of Game Virtual Environment . International Journal of Automation and Computing, 2007, 4(1): 25-29. doi: 10.1007/s11633-007-0025-4
[18]	Hai-Yan Zhang, Zheng-Xu Zhao. A Hierarchical Framework for Visualising and Simulating Supply Chains in Virtual Environments . International Journal of Automation and Computing, 2005, 2(2): 144-154. doi: 10.1007/s11633-005-0144-8
[19]	Wen-Yan Wu, Zheng-Xu Zhao. Realization of Reconfigurable Virtual Environments for Virtual Testing . International Journal of Automation and Computing, 2005, 2(1): 25-36. doi: 10.1007/s11633-005-0025-1
[20]	Huiping Shang, Zhengxu Zhao. Integration of Manufacturing Services into Virtual Environments over the Internet . International Journal of Automation and Computing, 2004, 1(1): 89-106. doi: 10.1007/s11633-004-0089-3

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Cite This Article

PDF

XML

Entire Issue PDF

用微信扫码二维码

分享至好友和朋友圈

Metrics

Abstract Views (3883) PDF downloads (3141) Citations (0)

Related Articles

A Photo-Modeling Approach to Restituting 3D Model Data from Single 2D Imagery for Rapid Prototyping of Artifact Products

1. Department of Instrumentation Science and Engineering, Southeast University, Nanjing 210096, PRC;

2. School of Computing, The University of Derby, Kedleston Road, Derby DE22 1GB, UK;

3. School of Mechanical & Manufacturing Engineering, Shandong University, Jinan 250061, PRC

Received: 2005-02-13

Fund Project:

This work is supported by Cheung Kong Scholars Program of the People's Republic of China, in association with Southeast University, Nanjing, PRC. (No.seuzx042001)

Key words:

Abstract: This article first generalizes the basic engineering phases of modern rapid prototyping processes, and then describes the techniques of data capture for data modeling and model making. The article also provides a brief overview of the photogrametric techniques of restitution of 3D objects, and highlights the difficulties and limitations of existing methods. It therefore presents a novel approach to photo-modeling for acquiring 3D model data from single 2D photorealistic images. Implementation of the approach is then described against a background of rapid prototyping processes to demonstrate the effectiveness of photo-modeling practice.

HTML

Reference (8)

[1]	C.A.Johnson.Recent developments in rapid prototyping &manufacturing technologies.In Proceedings of Conference of Time Compression Technology 2002 (TCT2002),Future Focus's Session,Repaid News Publications plc.Time Compression Technologies,Cheshire,UK,2002.
[2]	DELCAM.Reverse Engineering,[Online] .Availabe:http://www.delcam.com,2003.
[3]	M.Carbonnell,R.W.A.Dallas.The International Committee for Architectural Photogrammetry (CIPA)-aims,achievements,activities.Photogrammetria,vol.40,no.9,pp.193,1985.
[4]	M.Carbonnell,R.W.A.Dallas.The International Committee for Architectural Photogrammetry:A review of past achievements and future intentions.Photogrammetric Record,vol.62,no.11,pp.193,1985.
[5]	J.Badekas.3D Detailed Reconstruction of a Demolished Building by Using Old Photographs.The International Archives of Photogrammetry and Remote Sensing,vol.31,Part BS,pp.16,1996.
[6]	Introduction to Photogrammetry,[Online] .Availabe:http://www.univie.ac.at/Luft bildarchiv/wgv/intro.ht ml,2004.
[7]	Measuring and modeling the real world,[Online] .Availabe:http://www.photomodeler.com,2004.
[8]	R.S.Wright Jr,M.Sweet.OpenGL SuperBible,2nd edition,Waite Group Press,Indianapolis,USA,pp.198-206,2000.

A Photo-Modeling Approach to Restituting 3D Model Data from Single 2D Imagery for Rapid Prototyping of Artifact Products

Abstract

References

Metrics

Related Articles

通讯作者: 陈斌, bchen63@163.com

Metrics