Statistical Safety Analysis of Maintenance Management Process of Excavator Units

Ljubisa Papic, Milorad Pantelic, Joseph Aronov, Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units[J]. 国际自动化与计算杂志（英）/International Journal of Automation and Computing, 2010, 7(2): 146-152. doi: 10.1007/s11633-010-0146-z
 引用本文: Ljubisa Papic, Milorad Pantelic, Joseph Aronov, Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units[J]. 国际自动化与计算杂志（英）/International Journal of Automation and Computing, 2010, 7(2): 146-152.
Ljubisa Papic, Milorad Pantelic, Joseph Aronov and Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units. International Journal of Automation and Computing, vol. 7, no. 2, pp. 146-152, 2010. doi: 10.1007/s11633-010-0146-z
 Citation: Ljubisa Papic, Milorad Pantelic, Joseph Aronov and Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units. International Journal of Automation and Computing, vol. 7, no. 2, pp. 146-152, 2010.

## Statistical Safety Analysis of Maintenance Management Process of Excavator Units

###### Corresponding author:Ljubisa Papic received the Ph.D.degree in reliability engineering from University of Novi Sad,Serbia.Currently
• 摘要: Within this paper, the process of statistical safety analysis has been presented, which involves the following steps: formulation of basic principles of statistical safety analysis, initial events analysis, accident sceneries progress analysis, risk calculation, and risk calculation results analysis. On this basis, it has been concluded that the bucket wheel excavator SRs 120024/40(400kW)+VR safety criteria is the mechanism for the hoist of rotor s arrow failure modes, because in that case whole bucket wheel excavator failure would necessarily happen (excavator falling down on counterweight). Therefore, excavator units statistical safety analysis is accomplished preventively to obtain its effective maintenance management.
•  [1] G.Yang.Life Cycle Reliability Engineering,Hoboken,USA: John Wiley&Sons Inc.,pp.531,2007. [2] J.Knezevic,L.Papic,B.Vasic.Sources of fuzziness in vehi-cle maintenance management.Journal of Quality in Main-tenance Engineering,vol.3,no.4,pp.281-284,1997. [3] J.A.Nachlas.Reliability Engineering,Probabilistic Models and Maintenance Methods,Boca Raton,USA:Taylor and Francis Group,pp.403,2005. [4] T.A.Kletz.Learning from Accidents,Oxford,USA: Butterworth-Heinemann Ltd.,pp.279,1994. [5] J.Aronov.Methodology of Operational Safety Management on the Base Disturbances Statistical Analysis during Sys-tems Operation and Assessment Methods Standardization, Ph.D.dissertation,VNIIS,Moscow,pp.254,1998.(in Rus-sian) [6] T.Kletz.An Engineer s View of Human Errors,Rugby, USA:Institution of Chemical Engineers,pp.209,1991. [7] E.Zio.Computational Methods for Reliability and Risk Analysis,Singapore:World Scientific Publishing Co.Pte. Ltd.,pp.362,2007. [8] B.G.Dale.Managing Quality,Oxford,USA:Blackwell Publishing,pp.495,1999. [9] D.H.Stamatis.Failure Mode and E?ects Analysis,FMEA from Theory to Execution,Milwaukee,USA:ASQ Quality Press,pp.487,2003. [10] Zio E.An Introduction to the Basis of Reliability and Risk Analysis,Singapore:World Scientific Publishing Co.Pte. Ltd.,pp.234,2007. [11] L.Papic,M.Pantelic.Implementation Methodology for Risk Minimization into Maintenance Process of Produc-tion System at Coal Mines,Report of Contract No.4617, DQM Research Center-Kolubara Metal,Prijevor-Vre-oci,pp.468,2009.(in Serbian)
•  [1] Paweł D. Domański.  Study on Statistical Outlier Detection and Labelling . International Journal of Automation and Computing, 2020, 17(6): 788-811. doi: 10.1007/s11633-020-1243-2 [2] Shang-Lian Peng, Ci-Jian Liu, Jia He, Hong-Nian Yu, Fan Li.  Optimization RFID-enabled Retail Store Management with Complex Event Processing . International Journal of Automation and Computing, 2019, 16(1): 52-64. doi: 10.1007/s11633-018-1164-5 [3] N. R. Nayak, P. K. Dash, R. Bisoi.  A Hybrid Time Frequency Response and Fuzzy Decision Tree for Non-stationary Signal Analysis and Pattern Recognition . International Journal of Automation and Computing, 2019, 16(3): 398-412. doi: 10.1007/s11633-018-1113-3 [4] Zhi-Jing Li, Hai-Bin Wu, Jian-Ming Yang, Ming-Hao Wang, Jin-Hua Ye.  A Position and Torque Switching Control Method for Robot Collision Safety . International Journal of Automation and Computing, 2018, 15(2): 156-168. doi: 10.1007/s11633-017-1104-9 [5] Ana Paula Batista, Fábio Gonçalves Jota.  Analysis of the Most Likely Regions of Stability of an NCS and Design of the Corresponding Event-driven Controller . International Journal of Automation and Computing, 2018, 15(1): 39-51. doi: 10.1007/s11633-017-1099-2 [6] Shuo Liu, Wen-Hua Chen, Jiyin Liu.  Robust Assignment of Airport Gates with Operational Safety Constraints . International Journal of Automation and Computing, 2016, 13(1): 31-41. doi: 10.1007/s11633-015-0914-x [7] Hui Guan, Hongji Yang, Jun Wang.  An Ontology-based Approach to Security Pattern Selection . International Journal of Automation and Computing, 2016, 13(2): 168-182. doi: 10.1007/s11633-016-0950-1 [8] Imen Manaa, Nabil Barhoumi, Faouzi Msahli.  Global Stability Analysis of Switched Nonlinear Observers . International Journal of Automation and Computing, 2015, 12(4): 432-439. doi: 10.1007/s11633-014-0855-9 [9] Jinhua She, Hitoshi Nakamura, Koji Makino, Yasuhiro Ohyama, Hiroshi Hashimoto.  Selection of Suitable Maximum-heart-rate Formulas for Use with Karvonen Formula to Calculate Exercise Intensity . International Journal of Automation and Computing, 2015, 12(1): 62-69. doi: 10.1007/s11633-014-0824-3 [10] Hai-Peng Zhang, Bao-Qun Yin, Xiao-Nong Lu.  Modeling and Analysis for Streaming Service Systems . International Journal of Automation and Computing, 2014, 11(4): 449-458. doi: 10.1007/s11633-014-0812-7 [11] Fan Guo, Jin Tang, Zi-Xing Cai.  Image Dehazing Based on Haziness Analysis . International Journal of Automation and Computing, 2014, 11(1): 78-86. doi: 10.1007/s11633-014-0768-7 [12] Wei-Guo Yi, Ming-Yu Lu, Zhi Liu.  Regression Analysis of the Number of Association Rules . International Journal of Automation and Computing, 2011, 8(1): 78-82. doi: 10.1007/s11633-010-0557-x [13] Jin-Liang Wang, Huai-Ning Wu, Zhi-Chun Yang.  Passivity Analysis of Impulsive Complex Networks . International Journal of Automation and Computing, 2011, 8(4): 484-489. doi: 10.1007/s11633-011-0607-z [14] Yang Liu,  Mohammad Shahidul Hasan,  Hong-Nian Yu.  Modelling and Remote Control of an Excavator . International Journal of Automation and Computing, 2010, 7(3): 349-358. doi: 10.1007/s11633-010-0514-8 [15] Jing Wang,  Zhi-Jie Xu.  Video Analysis Based on Volumetric Event Detection . International Journal of Automation and Computing, 2010, 7(3): 365-371. doi: 10.1007/s11633-010-0516-6 [16] Manoj Kumar, A. K. Verma, A. Srividya.  Analyzing Effect of Demand Rate on Safety of Systems with Periodic Proof-tests . International Journal of Automation and Computing, 2007, 4(4): 335-341. doi: 10.1007/s11633-007-0335-6 [17] Renkuan Guo, Charles Ernie Love.  Grey Repairable System Analysis . International Journal of Automation and Computing, 2006, 3(2): 131-144. doi: 10.1007/s11633-006-0131-8 [18] Pedro Antão, C. Guedes Soares.  Fault-tree Models of Accident Scenarios of RoPax Vessels . International Journal of Automation and Computing, 2006, 3(2): 107-116. doi: 10.1007/s11633-006-0107-8 [19] Magda Bogalecka,  Krzysztof Kolowrocki.  Probabilistic Approach to Risk Analysis of Chemical Spills at Sea . International Journal of Automation and Computing, 2006, 3(2): 117-124. doi: 10.1007/s11633-006-0117-6 [20] Zai-Li Yang, Jin Wang, Steve Bonsall, Jian-Bo Yang, Quan-Gen Fang.  A Subjective Risk Analysis Approach of Container Supply Chains . International Journal of Automation and Computing, 2005, 2(1): 85-92. doi: 10.1007/s11633-005-0085-2

##### 计量
• 文章访问数:  4063
• HTML全文浏览量:  47
• PDF下载量:  3961
• 被引次数: 0
##### 出版历程
• 收稿日期:  2009-12-12
• 修回日期:  2010-02-27
• 刊出日期:  2010-04-15

## Statistical Safety Analysis of Maintenance Management Process of Excavator Units

### English Abstract

Ljubisa Papic, Milorad Pantelic, Joseph Aronov, Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units[J]. 国际自动化与计算杂志（英）/International Journal of Automation and Computing, 2010, 7(2): 146-152. doi: 10.1007/s11633-010-0146-z
 引用本文: Ljubisa Papic, Milorad Pantelic, Joseph Aronov, Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units[J]. 国际自动化与计算杂志（英）/International Journal of Automation and Computing, 2010, 7(2): 146-152.
Ljubisa Papic, Milorad Pantelic, Joseph Aronov and Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units. International Journal of Automation and Computing, vol. 7, no. 2, pp. 146-152, 2010. doi: 10.1007/s11633-010-0146-z
 Citation: Ljubisa Papic, Milorad Pantelic, Joseph Aronov and Ajit Kumar Verma. Statistical Safety Analysis of Maintenance Management Process of Excavator Units. International Journal of Automation and Computing, vol. 7, no. 2, pp. 146-152, 2010.

/

• 分享
• 用微信扫码二维码

分享至好友和朋友圈