Coverage Modeling and Reliability Analysis Using Multi-state Function

S. Prabhudeva; A. K. Verma

doi:10.1007/s11633-007-0380-1

S. Prabhudeva, A. K. Verma

文章导航 > International Journal of Automation and Computing > 2007 > 4(4): 380-387

S. Prabhudeva, A. K. Verma. Coverage Modeling and Reliability Analysis Using Multi-state Function[J]. 国际自动化与计算杂志（英）/International Journal of Automation and Computing, 2007, 4(4): 380-387. doi: 10.1007/s11633-007-0380-1

引用本文:

S. Prabhudeva and A. K. Verma. Coverage Modeling and Reliability Analysis Using Multi-state Function. International Journal of Automation and Computing, vol. 4, no. 4, pp. 380-387, 2007 doi: 10.1007/s11633-007-0380-1

Citation:

Coverage Modeling and Reliability Analysis Using Multi-state Function

doi: 10.1007/s11633-007-0380-1

1.
Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai 400 076, India

Coverage Modeling and Reliability Analysis Using Multi-state Function

1.
Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai 400 076, India

摘要: Fault tree analysis is an effective method for predicting the reliability of a system.It gives a pictorial representation and logical framework for analyzing the reliability.Also,it has been used for a long time as an effective method for the quantitative and qualitative analysis of the failure modes of critical systems.In this paper,we propose a new general coverage model (GCM) based on hardware independent faults.Using this model,an effective software tool can be constructed to detect,locate and recover fault from the faulty system.This model can be applied to identify the key component that can cause the failure of the system using failure mode effect analysis (FMEA).
- Fault tree /
- fault type /
- fault diagnosis /
- fault recovery /
- coverage model /
- Markov chain /
- reliability /
- unreliability
Abstract: Fault tree analysis is an effective method for predicting the reliability of a system.It gives a pictorial representation and logical framework for analyzing the reliability.Also,it has been used for a long time as an effective method for the quantitative and qualitative analysis of the failure modes of critical systems.In this paper,we propose a new general coverage model (GCM) based on hardware independent faults.Using this model,an effective software tool can be constructed to detect,locate and recover fault from the faulty system.This model can be applied to identify the key component that can cause the failure of the system using failure mode effect analysis (FMEA).
- Fault tree /
- fault type /
- fault diagnosis /
- fault recovery /
- coverage model /
- Markov chain /
- reliability /
- unreliability

[1]	S.A.Doyle,J.B.Dugan.Fault Trees and Imperfect Coverage:A Combinatorial Approach.In Proceedings of Annual Reliabity and Maintainability Symposium,IEEE,Atlant,USA,pp.214-219,1993.
[2]	S.A.Doyle,J.B.Dugan.A Combinatorial Approach to Modeling Imperfect Coverage.IEEE Transactions on Reliability,vol.44,no.1,pp.87-94,1995.
[3]	J.B.Dugan,S.J.Bavuso,M.A.Boyd.Fault Trees and Markov Models for Reliability Analysis of Fault-tolerant Digital Systems.Reliability Engineering and System Safety,vol.39,no.3,pp.291-307,1993.
[4]	P.Stavrianidis.Reliability and Uncertainty Analysis of Hardware Failures of a Programmable Electronic System.Reliability Engineering and System Safety,vol.39,no.3,pp.309-324,1992.
[5]	J.G.Choi,P.H.Seong.Reliability Assessment of Embedded Digital System Using Multi-state Function.Reliability Engineering and System Safety,vol.91,no.3,pp.261-269,2006.
[6]	J.B.Dugan,K.S.Trivedi.Coverage Modeling for Dependability Analysis of Fault-tolerant Systems.IEEE Transactions on Computers,vol.38,no.6,pp.775-787,1989.
[7]	L.Xing,J.B.Dugan.Generalized Imperfect Coverage Phased-mission Analysis.In Proceedings of Annual Reliability and Maintainability Symposium,IEEE,Seattle,USA,pp.112-119,2002.
[8]	K.Dimitri.Reliability Engineering Hand Book,vol.2,Prentice-Hall,New Jersey,1991.
[9]	N.Viswanadham,V.V.S.Sarma,M.G.Singh.Reliability of Computer and Control Systems,Elsevier,Netherlands and New York,1987.
[10]	B.S.Dhillon,C.Singh.Engineering Reliability-New Techniques and Applications,John Wiley,New York and Canada,1981.

[1]	Zhen Hu, Xiao Li, Ting Guan. A Study on Performance and Reliability of Urethral Valve Driven by Ultrasonic-vaporized Steam . International Journal of Automation and Computing, 2020, 17(5): 752-762. doi: 10.1007/s11633-016-1026-y
[2]	R. Bharathi, R. Selvarani. Hidden Markov Model Approach for Software Reliability Estimation with Logic Error . International Journal of Automation and Computing, 2020, 17(2): 305-320. doi: 10.1007/s11633-019-1214-7
[3]	Erphan A. Bhuiyan, Md. Maeenul Azad Akhand, Sajal K. Das, Md. F. Ali, Z. Tasneem, Md. R. Islam, D. K. Saha, Faisal R. Badal, Md. H. Ahamed, S. I. Moyeen. A Survey on Fault Diagnosis and Fault Tolerant Methodologies for Permanent Magnet Synchronous Machines . International Journal of Automation and Computing, 2020, 17(6): 763-787. doi: 10.1007/s11633-020-1250-3
[4]	Ann Smith, Fengshou Gu, Andrew D. Ball. An Approach to Reducing Input Parameter Volume for Fault Classifiers . International Journal of Automation and Computing, 2019, 16(2): 199-212. doi: 10.1007/s11633-018-1162-7
[5]	Xiao-Hong Qiu, Yu-Ting Hu, Bo Li. Sequential Fault Diagnosis Using an Inertial Velocity Difierential Evolution Algorithm . International Journal of Automation and Computing, 2019, 16(3): 389-397. doi: 10.1007/s11633-016-1008-0
[6]	Yu Zhang, Chris Bingham, Mike Garlick, Michael Gallimore. Applied Fault Detection and Diagnosis for Industrial Gas Turbine Systems . International Journal of Automation and Computing, 2017, 14(4): 463-473. doi: 10.1007/s11633-016-0967-5
[7]	Chen Li, Hong-Ji Yang, Hua-Xiao Liu. An Approach to Modelling and Analysing Reliability of Breeze/ADL-based Software Architecture . International Journal of Automation and Computing, 2017, 14(3): 275-284. doi: 10.1007/s11633-016-1044-9
[8]	Guo-Jin Feng, James Gu, Dong Zhen, Mustafa Aliwan, Feng-Shou Gu, Andrew D. Ball. Implementation of Envelope Analysis on a Wireless Condition Monitoring System for Bearing Fault Diagnosis . International Journal of Automation and Computing, 2015, 12(1): 14-24. doi: 10.1007/s11633-014-0862-x
[9]	Chun-Ling Dong, Qin Zhang, Shi-Chao Geng. A Modeling and Probabilistic Reasoning Method of Dynamic Uncertain Causality Graph for Industrial Fault Diagnosis . International Journal of Automation and Computing, 2014, 11(3): 288-298. doi: 10.1007/s11633-014-0791-8
[10]	Ajit Kumar Verma, A. Srividya, P. G. Ramesh. A Systemic Approach to Integrated E-maintenance of Large Engineering Plants . International Journal of Automation and Computing, 2010, 7(2): 173-179. doi: 10.1007/s11633-010-0173-9
[11]	Marcello Bonfè, Paolo Castaldi, Walter Geri, Silvio Simani. Design and Performance Evaluation of Residual Generators for the FDI of an Aircraft . International Journal of Automation and Computing, 2007, 4(2): 156-163. doi: 10.1007/s11633-007-0156-7
[12]	K. Krishna Mohan, A. Srividya, Ravikumar Gedela. Computational Analysis of Performance for Heterogeneous Integrated System with Test Automation . International Journal of Automation and Computing, 2007, 4(4): 353-358. doi: 10.1007/s11633-007-0353-4
[13]	Sing Kiong Nguang, Ping Zhang, Steven X. Ding. Parity Relation Based Fault Estimation for Nonlinear Systems: An LMI Approach . International Journal of Automation and Computing, 2007, 4(2): 164-168. doi: 10.1007/s11633-007-0164-7
[14]	Jochen Aβfalg, Frank Allgöwer. Fault Diagnosis of Nonlinear Systems Using Structured Augmented State Models . International Journal of Automation and Computing, 2007, 4(2): 141-148. doi: 10.1007/s11633-007-0141-1
[15]	Erfu Yang, Hongjun Xiang, Dongbing Gu, Zhenpeng Zhang. A Comparative Study of Genetic Algorithm Parameters for the Inverse Problem-based Fault Diagnosis of Liquid Rocket Propulsion Systems . International Journal of Automation and Computing, 2007, 4(3): 255-261. doi: 10.1007/s11633-007-0255-5
[16]	Wei-Hua Gui, Chun-Hua Yang, Jing Teng. Intelligent Fault Diagnosis in Lead-zinc Smelting Process . International Journal of Automation and Computing, 2007, 4(2): 135-140. doi: 10.1007/s11633-007-0135-z
[17]	Ling-Lai Li, Dong-Hua Zhou, Ling Wang. Fault Diagnosis of Nonlinear Systems Based on Hybrid PSOSA Optimization Algorithm . International Journal of Automation and Computing, 2007, 4(2): 183-188. doi: 10.1007/s11633-007-0183-4
[18]	Marek Kowal, Józef Korbicz. Fault Detection under Fuzzy Model Uncertainty . International Journal of Automation and Computing, 2007, 4(2): 117-124. doi: 10.1007/s11633-007-0117-1
[19]	Pedro Antão, C. Guedes Soares. Fault-tree Models of Accident Scenarios of RoPax Vessels . International Journal of Automation and Computing, 2006, 3(2): 107-116. doi: 10.1007/s11633-006-0107-8
[20]	You-Qing Wang, Dong-Hua Zhou, Li-Heng Liu. Robust and Active Fault-tolerant Control for a Class of Nonlinear Uncertain Systems . International Journal of Automation and Computing, 2006, 3(3): 309-313. doi: 10.1007/s11633-006-0309-0

点击查看大图

计量

文章访问数: 4205
HTML全文浏览量: 36
PDF下载量: 2465
被引次数: 0

Coverage Modeling and Reliability Analysis Using Multi-state Function

doi: 10.1007/s11633-007-0380-1

1. Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai 400 076, India

收稿日期: 2006-09-03
修回日期: 2007-05-28
刊出日期: 2007-10-15

关键词:

摘要: Fault tree analysis is an effective method for predicting the reliability of a system.It gives a pictorial representation and logical framework for analyzing the reliability.Also,it has been used for a long time as an effective method for the quantitative and qualitative analysis of the failure modes of critical systems.In this paper,we propose a new general coverage model (GCM) based on hardware independent faults.Using this model,an effective software tool can be constructed to detect,locate and recover fault from the faulty system.This model can be applied to identify the key component that can cause the failure of the system using failure mode effect analysis (FMEA).